Initial Boot & Network Configuration

HRD can be mounted to both standard walls and glass walls. Mounting kits for both are included in the box and the cable can be routed to any of the four sides or into the wall. The wall mount has a bayonet mount to snap on the unit, which also can be secured with a screw.

HRD can be connected via either a wired Ethernet connection or Wifi using a dynamic or static IP.
Once the device boots up, the logo should appear during the initial OS boot, then the configuration options will follow

Based on your network setup, you can select between Ethernet or Wifi configuration

Connect to your prefered Wifi network and setup the IP configuration

Installation

Now the HRD can be connected to the Humly Control Panel, which is connected to the booking system.

You need to enter the FQDN or the IP Address of the Humly Control Panel server and select the room you want to assign the device to.

Enter the IP address of the Humly Control Panel

Or enter the FQDN for Humly Control Panel

Click connect and wait for the HRD to connect and load

Select the room you want to connect your HRD to, you can apply filters to based on the country, city or building

Now the Humly Room Display unit should be ready to use!