After enabling the sensor integration globally on Humly Control Panel, you can now configure the room with the related sensors and customize the thresholds.
For each room resource you have in Humly Control Panel, you can configure the following sensors:
- Carbon dioxide CO₂
- Temperature
- Humidity
- Motion (for future usage)
To configure the resource with the related sensors, follow the steps below:
- From the HCP resources page, filter to the structure or search for the room you want to configure, click on room settings, select the room, and click edit selected
- The room setting blade will open, scroll down to reach the sensors section
- From the drop-down menu for each sensor, select the correct sensor for the room. The list will vary based on your setup
- If you have just installed a new sensor, and you cannot find it, please click on refresh list here
- Adjust the ranges if needed and save, and you can at any point reset to default values.
- Now you should be able to see the sensor readings in Humly Control Panel for each configured room.
- On Humly Room Display - HRD, you can see the sensor data by clicking on the sensor icons on the top bar
Note:
Humly Sensors is supported on version 1.32 or later; devices with older firmware will not show the sensor date.