The intended use of the PoE & Desk Control is to give Power over Ethernet to the Humly Booking Device.
Parts list
Parts included:
- PoE & Desk Control box
- Double adhesive tape for mounting
- Fixed Power cable, 2.5m long with Mini Display to 5-pin connector (Coil can be detached during installation)
Sold separately:
- Humly Booking Device*
- Desk Control Signal Cable*
Mounting
1. The PoE & Desk Control Device can be mounted on standard walls and underneath desks.
2. Use the double adhesive tape on the backside of the PoE & Desk Control device to attach it to standard walls and underneath a desk.
Connecting the PoE & Desk Control
For PoE:
1. Connect the fixed power cable to the mini display port on the Humly Booking Device
a. Make sure to reattach the coil to the cable 6cm from the connector after installation.
2. Connect a PoE/Ethernet cable to the ethernet port on the PoE & Desk Control box.
For Desk Control:
1. Connect a desk control signal cable* to the 8-pin port
Technical Specifications
Connectivity
- Fixed Power cable, 2.5m long, Mini Display to 5-pin connector (Removable coil)
- 8-pin port for Desk control signal cable
- Ethernet port for PoE/Ethernet cable (LAN RJ-45, Ethernet 10/100Mbps, PoE)**
PoE
- 802.3 at (Type 1) 37 - 57V --- 0.35A
Size and Weight
- Size (Width x Height x Depth): 62,8 x 54,5 x 24,8 mm (not including SR and cable)
- SR: 10.1 mm
- Mini DP Cable length: 2,5 m
- Weight: 150 grams, (RC: 12.5 grams)
Humly Booking Device, and cables for desk control are ordered separately and are not included.
Ethernet cable not included
For updated information about supported desk systems check www.humly.com as we are adding support for more systems continuously. Please note that each supported desk system requires a specific cable.